| PMA2002 Detector Bracket
|
| The model PMA2002 positioning detector bracket is
designed to hold and position two PMA detectors at selected angles. The bracket
mounts to the PMA2100. The bracket has a threaded ¼-20 hole for easy tripod
mounting. After the bracket is tripod mounted the built in level allows for
quick leveling. |
|
|
| PMA2003 Detector Tripod Mount
|
| The PMA2003 detector tripod mount adapts a PMA
series detector to a standard 1/4-20 thread for use with a standard tripod. |
|
| PMA2005 Power Control Relay |
| The PMA2005 is a control mechanism for the PMA2100. It features two solid
state relays which are controlled by the PMA2100’s Value alarm and Dose alarm.
Each of the two relays can control a 4 amp load from a source of 120V or 240V.
The relays are optically isolated from the AC line, therefore isolating the
PMA2100. |
 |
|
| PMA2006 Data Management Software
|
| The PMA Organizer software
provides an excellent tool to compliment the PMA. PMA Organizer is a
windows-based software package that facilitates data collection and
visualization. |
|
| PMA2009 Detector to Analog Output Box |
|
This box converts a PMA21XX detector to an analog output. The user must
supply +6 to +30 volts, and the box generates the +/- 5 volts required to power
the detector. The analog output can be connected to a data logger or volt
meter. Since the PMA style connector is still being used, the user can use
a PMA2100 / PMA2200 or their own data logger or meter. |
|
| PMA2010 Analog Detector Power Supply |
|
Some data loggers do not supply the negative 5 volts required for the PMA11XX
series detectors. This box allows these data loggers to use the PMA11XX
series detectors by generating the +/- 5 volts required to power them. The
user must supply +6 to +30 volts. The analog output can be connected to a
data logger or volt meter. |
|
| PMA2011 Analog Detector Power Supply AC
input |
|
Same as PMA2010 but with an AC input. The user must supply 120VAC (240VAC
also available). |
