UV Sources selection guide
Our solar simulators precisely reproduce high-intensity solar ultraviolet
(290-400nm) radiation. By
eliminating visible and infrared radiation, the UV reproduced has an intensity 15-20 times
greater than in sunlight without causing thermal discomfort. This makes our
simulators ideal for skin and
material testing. All currently offered models come with a high precision power supply,
xenon lamp and an internal igniter to minimize electromagnetic interference.
Model 16S Solar UV Simulator
Single output 150W 1cm diameter spot UV-A or UV-A + UV-B, Air Mass 0, 1.0,
1.5, 2.0 spectrum (user selectable);
electrically controlled shutter for use with PMA2100 / DCS
Model 16S-300 Solar UV Simulator
Single output 300W 1cm diameter spot UV-A or UV-A + UV-B, Air Mass 0, 1.0,
1.5, 2.0 spectrum (user selectable);
electrically controlled shutter for use with PMA2100 / DCS
Model LS-1000 Solar Simulator
Single output, 1000W, 2-10 inch round spot size or 2-8 inch square spot size.
UV-A, UV-A + UV-B, Air Mass 0, 1.0, 1.5, 2.0 spectrum (user selectable
filters).
Model 601 Multiport Solar UV Simulator
150W, six independent outputs 9mm in diameter; flexible liquid light guides; adjustable
column mount integrated with the power supply; UV-A or UV-A + UV-B spectrum (user
selectable); electrically controlled shutter for use with PMA2100
/ DCS
Model 601-300 Multiport Solar UV Simulator
300W, six independent outputs 9mm in diameter; flexible liquid light guides; adjustable
column mount integrated with the power supply; UV-A or UV-A + UV-B spectrum (user
selectable); electrically controlled shutter for use with PMA2100
/ DCS
Model XPS200 Xenon Lamp Power Supply
Precision current source for Xenon arc lamps from 50 to 200W
Model XPS400 Xenon Lamp Power Supply
Precision current source for Xenon arc lamps from 150 to 400W
